Easy to use, reusable. Durable, sensivity and working capasity is very high. Efficency is excellent for the constructions under floor and under beam. Horizantal scaffolding members connected to inner and outer tube placed movable fledges and stiffed against possible burklings.

Highly economical in long term...

İnner tubes dimensions Ø 48 - 3 mm , outer tubes dimensions Ø 60 - 2.5 mm, Precise adjustment screw dimensions Ø 60 - 3 mm.. Bottom tray manufactured from 5mm iron sheet and has Ø 10mm reliefed holes.

 

Two types of floor and under beam settings manufactured from 5mm iron sheet.

 

Adjusting spindle jack ( thread ) manufactured at lathe tapping square threads on steel tubes by compressing method then welded to outer tube or directly outer tube tapped. Rough adjusting holes punched in Ø 15mm.

 

Telescopic props work well with steel and wooden floor formworks. Depending on the type of the ridge setting, easily used under floor and beam. At concrete casting above 400cm telescopic propsunder formwork should be connected to each other. Movable flanges fixed to inner and outer tubes connected to each other with horizantal connection members and avoid possible burklings.

 www.oguzhaniskele.com